NEUROTRAC MYOPLUS2

CLICK HERE if you require images for your website use

Special pricing for Professionals

Login or Register to view pricing

DESCRIPTION

  • The Classic Biofeedback / ETS / Stimulation device. A proper tool for training and progress assessment.
  • Pre-set programmes for Incontinence treatment, Sports and muscular development, neuro-muscular Rehabilitation.
  • Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
  • 2 channel EMG (Biofeedback) combined with 2 channels NMES (stimulation).
  • 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
  • Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
  • Multilingual LCD screen and voice prompts for Biofeedback.
  • Manual and Automatic threshold control.
  • EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
  • Stand alone device or used in conjunction with established multilingual software.
  • Now with Bluetooth connectivity!
  • The unit sends up to 10 metres of wireless data to PC software

EMG (Biofeedback)

  • Dual channel EMG
  • EMG Range: 0.2 to 2000 μV RMS (continuous)
  • Sensitivity: 0.l μV RMS
  • Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
  • Selectable Bandpass filter – 3db Bandwidth,
    • a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
    • b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
  • Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
  • Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
  • Work / Rest periods: 2-99 seconds
  • Number of Trials: 1-99

STIM (Neuromuscular Stimulation)

  • Dual channel Stimulator
  • Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
  • Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
  • Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
  • Pulse width selection: 50-450 μS (2% accuracy)
  • Pulse rate selection: 2-100 Hz (2% accuracy)
  • Work / Rest periods: 2-99 seconds
  • Time 1 – 99 minutes
  • Ramp up time: 0.1 – 9.9 seconds
  • Preset and user programmable treatment Programs
  • Automatic output shut off with detection of open electrode above 0.5 mA
  • Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.
Show more infoShow less info
Prices are displayed EX GST
CODE Description Alternative Product Price
2306 NEUROTRAC MYOPLUS2 2305

Please or Signup to view table prices

You'll also love...

×

Request Product Spec Sheet

Please enter your first name.

Please enter your last name.

Please enter your email.

Please enter your phone number.

×

Request A Bulk Buy Quotation - Fill in the below and one of our team will be in touch ASAP.

Please enter your first name.

Please enter your last name.

Please enter your email.

Please enter your phone number.

×

Enquire About Price

Please enter your first name.

Please enter your last name.

Please enter your Company name

Please enter your phone number.

Please enter your email.

×